horsch Maestro SW 1630, Руководство пользователя

Страница: 114 / 132

114 Maestro SW Owner’s Manual – Ver. 2.4 11/2018
www.horsch.com
Annual Maintenance, or every 500 working hours
1. Repack carrier roller wheel bearings (item 6) (if equipped).
Carrier Roller Spanner Nut Size Torque (N-m)* Torque (ft-lb)*
N-06 10 +/- 2 7.4 +/- 1.5
* Special spanner nut tool 2P-0022 is available from your Camoplast dealer.
Every 5 years, or 2000 working hours
1. Drain and replace idler, mid-roller, and mid-roller pivot reservoirs.
2. Oil level should reach to lower level of fill plug with unit parked on level surface.
Off Season Storage
1. For optimum life, TTS tracks should be stored indoors, in dry environment with a temperature
between 5° and 25° C (40-77F). The tracks should not be exposed to direct sunlight or heat. No
petrochemicals and related vapors, no electrical devices producing ozone should be placed in the
same area.
2. Should it be necessary to disassemble the tracks from the undercarriage, lay them on the ground
on one edge avoiding bending radius less than 30 in. (750 mm). Do not lay the rubber components
on dirty surfaces contaminated by oil, grease or other chemical products.
3. Do not paint rubber components.