horsch Maestro RC Central Fill 1230, Руководство пользователя

Страница: 71 / 108

Maestro RC Owner’s Manual – Ver. 2.1 10/2019 71
www.horsch.com
When reassembling, make sure that both
housing halves and the seal on the downpipe are
correctly seated. Tighten both star knobs evenly
and only hand tight.
Metering Disks
The metering disks for different seed types are
assembled on the drive shaft. Due to the notch
in the disk it cannot be assembled incorrectly.
Metering Disk
There are metering disks for each seed type.
The disks are differentiated as follows:
• Holes or Slots
• Number of Holes / Slots
• Size of Holes / Slots
The selection of disks is continually adapting and
changing. Before you start planting, you should
ask your HORSCH representative for further
assistance with metering disks.
If the metering disks are to be
changed out and used again at
a later date, each disk should
be marked with the row number
that it was removed from, so it
can be installed back into the
metering unit it came out of.