horsch Maestro CX Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 184

background image

2 | Safety and responsibility

16

60013444 • 01 • 01/2021 • en

6. Jump away from the machine. Ensure a safe stand when jumping. Do not

touch the outside of the machine.

7. Move away from the machine with short stepping strides.

2.6.8 Technical limiting values

If the technical limiting values of the machine are not observed, the machine may
get damaged. This can lead to accidents with severe or even fatal physical injuries.

The following technical limiting values are of particular importance for safety:

• Permissible total weight

• Maximum axle loads

• Maximum drawbar load

• Maximum speed

See chapter Technical data, Type plate and Type approval.

Ø

Also pay attention to the maximum loads for the tractor.

2.6.9 Use in the field

DANGER

No passengers are allowed to ride on the machine!

Ø

Operate the machine only in reliable weather conditions.

Ø

Check the area immediately around the machine (for children!) before driving
off and commissioning the machine. Ensure sufficient visibility.

Ø

Check the condition of the cultivation tools and their mounting before use.

Ø

Driving stability may be affected in the following situations, especially when
cornering: Driving at accelerated speed, along the contour line toward the
slope and on uneven terrain with longitudinal and lateral incline. Ensure suffi-
cient stability of the machine. Pay attention to the limiting values for the
tractor.

Ø

Driving stability may be affected when using auxiliary equipment or, if permit-
ted, driving with filled seed hopper. Ensure sufficient stability of the machine.
Pay attention to the limiting values for the tractor.

Ø

Do not remove any of the prescribed and supplied protective devices.

Ø

Stay clear of the operating range of hydraulically operated parts.

Ø

Do not drive backwards with the machine lowered. The components have only
been designed for forward travel in the field and may be damaged when re-
versing.

2.7 Changing equipment / wear items

Ø

Only pulling tools may be attached that meet the technical requirements ac-
cording to these operating instructions. HORSCH does not assume any liability
for damages resulting from the attachment of non-fitting pulling tools as well
as incorrect mounting.

«
...
14
15
16
17
18
...
»

Содержание Maestro CX

























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Maestro CX

Бренд: Canta Страницы: 2

Бренд: Palazzetti Страницы: 112

Бренд: JB-Lighting Страницы: 60

Бренд: ParaBody Страницы: 3

Бренд: Hach Страницы: 52

Бренд: hager Страницы: 2

Tablet1000 Series

Бренд: Hantek Страницы: 98

Бренд: Palmako Страницы: 83

Бренд: Nectar Страницы: 46

Бренд: Neauvia Страницы: 17

Бренд: Yamaha Страницы: 5

Бренд: U-Line Страницы: 6

Бренд: Xalingo Страницы: 2

INTRA PROPHYwiz 181 P

Бренд: KaVo Страницы: 22

Бренд: Festo Страницы: 40

Бренд: Neurotech Страницы: 24

Бренд: Cablexpert Страницы: 12

500 FleetBroadband

Бренд: Sailor Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды