horsch Maestro 16 SX, Руководство по эксплуатации

Страница: 76 / 158

8 | Drill unit
76 60026387 • 01 • 03/2021 • en
NOTE
Ø
Never work without trap roller!
Serious drilling errors may occur if the grains are not pressed against the soil
by the trap roller!
Ø Check the position and function of the trap rollers regularly.
Wear When new, the trap roller runs with the lowest setting (approx. 5 cm lower than the
coulter discs). As the coulter discs wear off, this distance diminishes and needs to be
re-adjusted.
Ø When the coulter discs are worn, move the trap rollers to the corresponding
position, depending on the diameter of the coulter discs, see section
Coulter
disc – Coulter system 15" .
Please note when parking
the machine
The trap rollers must not rest on the ground. Disassemble the trap rollers, the ma-
chine can then rest on the coulter discs.
Trap roller in Parking Position
8.1.4 Press rollers
With their V-shaped arrangement the press rollers close the seed furrow and press
the soil against the seed.
With the adjustment lever the consolidation effect of the press rollers can be
matched to soil conditions and drilling depth.
Adjusting the press rollers