horsch Maestro 12.45 CV, Руководство по эксплуатации

Страница: 92 / 155

Operating the metering
system
General notes
The parts inside the metering unit are precision
parts!
¾
Negative impact such as contamination,
leaks, moisture or wear compromise the
quality of the seed.
¾
Always handle the parts carefully and without
force.
¾
Replace parts if worn or damaged.
¾
Do not oil, grease or spray the parts with
corrosion protection agents. The parts would
stick together or become porous.
¾
Tighten screws only by hand when replacing
components. Do not use power screwdrivers.
¾
Do not damage the cables.
¾
When assembling housing parts, join the
individual parts correctly applying only slight
pressure.
Changing and adjusting
components
Various quick change fixtures on the metering
unit facilitate efficient conversion, adjustment
and maintenance.
Emptying the metering unit
1
¾
Open the quick closures and remove the
removable half of the housing.
¾
Position the grain feed gate all the way down.
¾
Hook up the emptying bag (1).
¾
Dismantle the metering disk and empty the
metering chamber.
¾
If necessary, position the grain feed gate
upward to empty the seed hopper.
NOTE
The metering unit must first be emptied before
replacing the following components.
88 89