horsch Maestro 12.45 CV, Руководство по эксплуатации

Страница: 146 / 155

Selecting the metering auger
Metering augers in different sizes are available
for different granulates/types of fruit and plac -
ing quantities. The volume is embossed on the
auger shaft for differentiation.
Metering auger Size in cm³
3
6
12
24
38
66
NOTES
•
The preselection of the metering auger does
not replace calibration!
Depending on the result of the calibration, it
may be necessary to switch to a larger/smaller
metering auger.
•
The specified working widths apply to ma -
chines with one metering auger.
For machines with two metering augers, the
table for half the working width must be used
(e.g. Table
3 m
for machine with 6 m working
width).
•
If according to the table several metering
augers can be used:
Select the auger with which the intended
placing quantity lies as close as possible to
the centre of the min./max. placing quantity.
142 143