horsch LEEB PT 330, Руководство по эксплуатации

Страница: 169 / 203

14.5 Central lubrication
system
The carrier vehicle (without implement) of the
PT 330 has two lubrication circuits, which are
supplied by the central lubrication pump.
Dosing takes place automatically in compliance
with a fixed interval.
The central lubrication pump is located behind
the left cabin covering.
In case of a too low filling level of the central lu -
brication pump, the terminal will show a warning.
2
1
Central lubrication pump
NOTE
Check the filling level of the central lubrication
system every week and fill it up in due time.
Do not exceed the max. grease level!
Fill central lubrication pump with the pump
supplied via the filling coupling (1) or use
a conventional grease gun via the grease
nipple (2).
Pump for filling the central lubrication via the filling
coupling (1)
The system has been designed for conven-
tional multi-purpose greases of NLGI class 2
for summer and winter operation.
¾
Use greases with high pressure additives
(EP-greases).
¾
Use only greases with identical saponifica -
tion type:
¾
Lubricants with solid constituents must not
be used1
169