horsch Leeb 6 GS, Руководство по эксплуатации, Страница: 98 / 154

98
8.3.1 Filling the solution tank
through the filling dome
1. Determine the exact filling quantity (see also
chapter "Calculating filling or refilling quanti -
ties", chap. 8.2.1.)
2. Open the lid on the filling dome.
3. Fill the solution tank through the filling open -
ing using a water line with "free outflow".
4. Always keep an eye on the level gauge
while filling.
5. Stop filling the solution tank at the latest
- when the filling limit is reached.
- before the permissible payload of the crop
protection sprayer is exceeded by the filled
in fluid quantity.
6. Close the lid on the filling dome.
8.3.2 Filling the solution tank
through the filler connection
Damage caused by overfilling the
closed solution tank.
Strictly keep the lid open while filling!
Pay attention to the applicable regulations for
filling the solution tank through the suction hose
from open water tapping points (see also chapter
"Using the machine").
¾
Always keep an eye on the level gauge while
filling.
¾
Stop filling the solution tank at the latest
- when the filling limit is reached.
- before the permissible payload of the crop
protection sprayer is exceeded by the filled
in fluid quantity.
a
OPEN
CLOSE
Quick filling valve
b
C-Box
1. Enter the desired container content in the
terminal.
2. Connect the suction hose to the filling con -
nection.
3. Open the quick filling valve (a).
4. Start the filling process; Set the button (b) on
the C-Box to “ON” for 2 seconds.
5. Slightly close the quick filling valve if the
pump pressure drops below 1 bar.
6. The suction fitting switches off automatically
when the desired filling level is reached
The filling process can be aborted at any time.
Set the button (b) to “OFF” for 2 seconds.
7. Disconnect the suction hose.
8. Close the ball valve with the cap.