horsch Leeb 6 GS, Руководство по эксплуатации, Страница: 79 / 154

79
4.8.5 Multiple nozzle body manual
3-fold
The three outlet nozzle body is recommended
if more than only one nozzle type is to be used.
Only the vertically arranged nozzle will be sup-
plied.
By turning the nozzle body, another nozzle is
brought into use.
In intermediate positions the nozzle body is
switched off.
Always flush the spraying lines before
turning the three-fold nozzle head to
another nozzle type.
If a pressure of more than 4 bar is applied to
the compressed air connection (4), the valve
will open and fluid can flow out.
Without pressure the valve is closed.
1
2 3 4
5
6
7
8
9
(1) Nozzle body
(2) Diaphragm
(3) Pneumatic control valve
(4) Compressed air connection
(5) Optional nozzle filter
(6) Rubber seal
(7) Nozzle
(8) Bayonet connection
(9) Bayonet cap
4.8.6 Multiple nozzle body
pneumatic
These multiple nozzle bodies are installed in the
form of dual or 4-fold versions.
In this case it is possible to switch the desired
nozzle from the terminal. You may even switch
on several nozzles at a time.
The pneumatic control valves are integrated in
the nozzle carrier. If a pressure of more than 4
bar is applied to the compressed air connection
(4), the valve will open and fluid can flow out.
Without pressure the valve is closed.
1
2
3
4
5
6
7
8
9
10
(1) Hinged clamp
(2) Diaphragm
(3) Pneumatic control valve
(4) Compressed air connection
(5) Optional nozzle filter
(6) Rubber seal
(7) Nozzle
(8) Bayonet connection
(9) Bayonet cap
(10) Nozzle body