horsch Leeb 6 GS, Руководство по эксплуатации, Страница: 50 / 154

50
2.10 Noise development data
The work place related emission value (sound pressure level) is 74 dB(A), measured in operating
condition with the cabin closed at the ear of the tractor driver.
Measuring instrument: OPTAC SLM 5.
The sound pressure level mainly depends on the vehicle used.
2.11 Necessary tractor equipment
The tractor must meet the specified power requirements and should be fitted with all necessary
electric, hydraulic and brake connections, to be able to work with the machine.
Tractor engine power
6 GS 95 kW (130 HP) and higher
7 GS 100 kW (136 HP) and higher
8 GS 110 kW (150 HP) and higher
Note: These values apply for level areas. Depending on work conditions (e.g. very steep / hilly
terrain) higher engine power may be required.
Electrics
Battery voltage: 12 V (Volt)
Socket for lighting: 7-pin
Hydraulics
Maximum operating pressure: 200 bar
Tractor pump power: Pump
Hypro 9306: min. 60 l/min at 190 bar for
hydraulic pump drive
Pump
ACE FMC 750F-HYD M22: min. 65 l/min at 190 bar for
hydraulic pump drive
Hydraulic oil in the machine Hydraulic/gear oil OMV austromatik IGB
The hydraulic/gear oil in the machine is suitable for the com-
bined hydraulic/gear oil circuits in all common tractor brands.
Tractor control units: 1x double acting for hydraulic support
1x pressureless return flow
1x Pressure supply
with hydraulic oil supply via Load-Sensing port:
1x Load-Sensing pilot line
with hydraulic oil supply via tractor control unit:
1 x pressure supply in continuous operation (min. 60 l/min)
Two circuit service brake system:
1 coupling head (red) for the supply management
1 coupling head (yellow) for the brake line