horsch Leeb 6 GS, Руководство по эксплуатации, Страница: 42 / 154

42
2.6 Intended use
The crop protection sprayer is intended for the
transport and application of crop protection
agents (insecticides, fungicides, herbicides etc.)
in the form of suspensions, emulsions and, as
well as liquid fertiliser.
The sprayer is solely intended for agricultural
use for the treatment of large area cultivations.
It is compliant with the latest technical standard
and, when correctly set and adjusted and with the
correct metering, it ensures biological success.
The equipment is suitable for terrain slop-
ing in
¾
contour line
travel direction to the left 15 %
travel direction to the right 15 %
¾
Line of fall
uphill 15 %
downhill 15 %
Intended use also includes:
¾
paying attention to all notes in these operating
instructions.
¾
compliance with the specified inspection and
maintenance work.
¾
the sole use of original HORSCH-LEEB AS
spare parts.
Any use different than described above is pro -
hibited and is considered unintended.
For damage caused by unintended use
¾
the operator shall be solely responsible,
¾
HORSCH LEEB AS GmbH will not assume
liability.
2.6.1 Intended equipment of the
crop protection sprayer
The intended equipment of the crop protection
sprayer results from the combination of
¾
Basic equipment and undercarriage
¾
Tyres
¾
Drawbar
¾
Pressure fitting
¾
Pump equipment
¾
Spraying boom
¾
Spraying lines with section control and op-
tional equipment
Should one of our sales offices create an in -
dividual type, that is not listed hereunder, the
sales office in question is obliged to issue the
declaration required by § 25 of the plant protec-
tion act from 15/09/1986, to the JKI.
The forms required for this purpose are
available from:
Julius Kühn-Institute
Federal Research Institute for Crops
Messeweg 11/12
D-38104 Braunschweig