horsch Leeb 5.280 VL, Руководство по эксплуатации

Страница: 134 / 308

System / Night Settings
The Night Settings menu allows adjusting the val-
ues for dimming at night.
•
Brightness: Determines to which value the
display shall be dimmed at night (the lower
the darker)
•
Limit: Determines at which ambient bright-
ness the monitor switches from day to night
mode. If the limit is set to low, the monitor
switches between day and night mode at low
ambient brightness. The monitor is always
in day mode when setting the limit to 0. The
monitor is always in night mode when setting
the limit to 99.
Trigger Input Setup
In The Trigger Input Setup menu the trigger inputs
are adjusted to the connected vehicle signals.
•
active high: the assigned view is activated
when voltage is applied to the trigger input
•
active low: the assigned view is activated
when no voltage is applied to the trigger input
Rear view camera (optional)
The rear view camera is located on the middle
section of the folding boom. The rear view cam-
era starts automatically when driving backwards.
Rear view camera in folding boom middle section
Wheel camera (optional)
The wheel camera helps entering the track. The
camera is located on the fender of the right front
wheel, with view onto the field entry.
Wheel camera on the right front wheel fender
Nozzle camera (optional)
The nozzle camera is used to monitor the spray-
ing cones. The camera is located on the bracket
for Night Light cleaning.
Nozzle monitoring camera
130 131