horsch LEEB 4 LT, Руководство по эксплуатации

Страница: 50 / 162

Function - continued
See also "Fluid circuit - components"
a
c
m
n
h
i
k
l
b
d
e
f
g
o
1
2
3) Spraying operation
In spraying operation the drawn in fluid is di -
rected through the pressure filter
(e)
and the
flow meter
(f)
into the nozzle line
(g)
.
The circulation valve (o) is in position (1) , so that
pressure builds up in the nozzle line and chemi-
cal is pressed into the nozzles from both sides.
4) Circulation
With the nozzles switched off, the circulation
valve
(o)
is in position
(2)
, so that the spraying
fluid flows through the nozzle line back into the
tank. This prevents the formation of deposits.
Chemical is immediately available at the nozzles
when switching on.
Due to the permanent circulation of the biocata-
lyst through the complete nozzle pipe while the
sprayer is switched off, spraying fluid is perma -
nently applied to all nozzles.
Even when switching on individual sections or
the entire spraying line for the first time, the
biocatalytic solution is directly and well mixed
available.
This circulation successfully prevents the forma-
tion of deposits and blockage.
50 51