horsch Leeb 4 AX, Руководство по эксплуатации

Страница: 79 / 161

SectionBox
With the SectionBox, up to 13 sections can
be switched quickly and easily via mechanical
switches.
The SectionBox can be used in addition to the
multifunction lever or alone to operate the sec-
tions.
Active sections can be identified by the illumi -
nated LED of the respective switch. Depending
on the position of the section main switch, the
active sections are switched on or preselected.
¾
If the section main switch is activated, all ac-
tive sections are switched on.
¾
If the section main switch is deactivated, all
active sections are in the preselected state.
The SectionBox can be mounted in two differ -
ent ways:
•
SectionBox via a Sub-D connector for con-
nection to the terminal.
•
SectionBox via a CPC plug for connection to
an in-cab socket.
¾
At the terminal the SectionBox must always
be switched to without AUX-N .
¾
The multifunction lever must always be con-
figured to AUX1 .
¾
For the combination te multi-function
SectionBox, the following connection
sequence must be observed!
1. ISOBOS
2. Multi-function handle
3. SectionBox
4. Terminal
NightLight
Extremely bundled light (LED spotlight) to illu-
minate the spraying cones.
The LED spotlights are controlled via the ter-
minal.
NightLight
73