horsch LEEB 12 TD, Руководство по эксплуатации, Страница: 93 / 181

SectionBox (optional)
The SectionBox is available in the versions
with 13 or 18 switches. Border/edge nozzles or
sections can be assigned to the switches (1).
The SectionBox can be used in addition to
the multi-function handle or alone to operate
the sections. The switch (2) allows switching
between the input devices.
Active sections or border/edge nozzles can
be identified by the illuminated LED of the
respective switch (3).
4
1
2
3
HORSCH SectionBox, 13 sections
¾
When the main switch (4) is activated, all
active sections or border/edge nozzles are
enabled.
¾
If the main switch (4) is deactivated, all active
sections or border/edge nozzles are in the
preselected state.
Regarding the allocation of the respective
sections or border/edge nozzles to the switches
of the SectionBox, observe the associated
terminal operating instructions.
Installation
The SectionBox can be mounted in two different
variants:
•
with a sub-D connector for connection to the
terminal
•
with a CPC plug for connection to an in-cab
socket
NOTE
¾
At the terminal the SectionBox must always
be switched to AUX-N.
¾
The multi-function handle must always be
configured to AUX2.
¾
For the combination te SectionBox,
the following connection sequence must be
observed!
1. ISOBUS
2. SectionBox
3. Multi-function handle
4. Terminal
88 89