horsch LEEB 12 TD, Руководство по эксплуатации, Страница: 89 / 181

GPS receiver (optional)
The description applies to the GPS receiver
version of Müller Elektronik A101. Additional
versions of other manufacturers may deviate.
Description
The GPS receiver serves to determine the exact
position of the machine.
1
3
4
5
2
1 GPS receiver
2 Metal plate
3 Magnetic base
4 Connecting cable
5 Self-adhesive plate
Meaning of the LED light
The GPS receiver indicates the quality of the
connection via a status LED:
•
Red: The GPS receiver is connected to the
terminal but cannot receive a GPS signal
•
Orange: The GPS receiver can receive GPS
signals but the differential signal is absent.
Accuracy is therefore very low.
•
Green: The GPS receiver receives GPS
signals and differential signals.
Installation
CAUTION
Risk of crushing from very powerful magnet on
the base of the GPS receiver!
When installing the GPS receiver, hold it firmly
with both hands to make sure no fingers get
between the magnetic base of the GPS receiver
and a metal surface!
NOTE
The GPS receiver requires unobstructed view
of the sky!
Mount the GPS receiver on the roof of the
vehicle cabin or the crossbeam of the crop
protection sprayer. A pre-installed carrier plate
is available there for the GPS receiver.
Shadowing of the GPS receiver is to be avoided.
Carrier plate for the GPS receiver of the crossbeam
84 85