horsch Joker RT Series, Руководство пользователя

Страница: 31 / 50

31 | P a g e
RollFlex Packer
The Roll-Flex system can be attached as a rear packer on the machine. While in field use, the packer is
used to lift/lower the machine. The RollFlex system consists of a frame support, numerous spring
tongues, heavy duty 50mm greaseless maintenance free bearings and miscellaneous shims and
hardware.
NOTE: Proper shimming technique will reduce or minimize side load on bearings. See model year
specific parts catalog for further illustration and reference.
While in use in the field the machine always travels on the packer . NOTE: Never exceed a maximum
operating speed of 8mph while traveling on the Roll-Flex system only during ‘Field’ mode. The packer
is not rated for extreme loads at high speeds.
Due to the weight of the machine a high consolidation and a fine crumbly, level surface is achieved.
Roll-Flex Packer
With cohesive soils the packers may pick up more soil and thus become considerably heavier.
This can overload components or soil the roads during transportation.
Packers must therefore, always be cleaned before road transportation if they have
picked up soil.
M16 Countersunk Bolts –
Torque to 170 Ft-lbs. (x4).
Torque from nut side.
M12 Socket Head Bolts –
Torque to 120 Ft-lbs. (x2).
Torque first one, then
second, and then first one
again.