horsch Finer SL, Руководство по эксплуатации

Страница: 47 / 58

Care and maintenance | 8
60056796 • 002 • 07/2021 • en 47
Electrics
Electric lines Check for damage 40 h
Hydraulics
Hydraulic system and com-
ponents Check all hydraulic components and hoses for function, leak tight-
ness, fastening and chafing. 40 h
Wheels
All wheels Check for damages (cracks, etc.) and wear and replace if necessary. daily
All wheels Retighten all wheel nuts.
M18 x 1.5 – 300 Nm [221 ft.lb]
M22 x 1.5 – 510 Nm [376 ft.lb]
50 h
Bearings of carrying axle
journals Check clearance and adjust if necessary (workshop work) 120 h /
6 months
Support wheels 23x10.50-12 Check air pressure and adjust if necessary: 3.0 bar [44 psi] daily
Safety installations
Lighting and warning boards Check condition and function daily
Warning and safety stickers Check that they are in place and legible 40 h
8.1.4 At the end of the season
Maintenance location Work instructions
Complete machine Perform care and cleaning work; do not spray plastic parts with oil or similar.
Spray the piston rods of the hydraulic cylinder with a suitable corrosion protection
agent.
Check all screw and plug-and-socket-connections for firm seating (see torque table)
Check frame and connecting pieces for condition and tight fit.
Check electrical lines for damage and replace, if necessary.