horsch Finer SL, Руководство по эксплуатации

Страница: 26 / 58

4 | Technical data
26 60056796 • 002 • 07/2021 • en
Information on year of manufacture
• Year of manufacture in VIN/Vehicle Identification Number (coded):
Embossed when basic vehicle or undercarriage is manufactured
• Year of manufacture on the type plate:
Time of final production of the machine in the respective equipment version
Due to processes, there may be some periods between the manufacturing of the ba-
sic vehicle and final production. There may be differences therefore with the spe-
cification of the year of manufacture.
4.3 Requirements on the tractor
WARNING
Risk of accident from overloading the tractor.
Ø
Observe the permissible values of the tractor for axle loads, total weight, tyre
load bearing capacity and air pressure.
Ø
Verify the suitability of the tractor before commissioning.
The tractor must meet the following requirements to be able to use the machine as
intended:
Implement attachment
Finer 6 SL 7 SL
Three-point Cat. III/IV Cat. III/IV
*Tractor link arm implement attachment:
III: Coupling point distances Cat. III Pin diameter Cat. III
IV: Coupling point distances Cat. IV Pin diameter Cat. IV
II/III: Coupling point distances Cat. II Pin diameter Cat. III
III/IV: Coupling point distances Cat. III Pin diameter Cat. IV
Hydraulics
Number of dual-acting control units 1 (+1 per option)
Oil grade Mineral hydraulic oil
Oil purity acc. to ISO 4406: 18/16/13
Maximum system pressure 210 bar [3.045 psi]
Engine power
Finer 6 SL 7 SL
min. (kW / HP) 115/160 130/180
max. (kW / HP) 200/270 220/300