horsch 420016020001 Скачать руководство пользователя страница 73

Страница: 73 / 84

Omnis FT Owner’s Manual – Ver. 2.0 06/2020

www.horsch.com

SCH

Preparation for Storage

If you want to store the machine for a longer period, pay attention to the following points:

•

Park the machine inside a building if possible.

•

Remove any soil/dirt buildup on the machine.

•

Protect the machine against rust. If you want to spray the tillage machine with oil, use only oils

that are easily biodegradable, e.g., rapeseed oil.

Removing from Storage

1. Check tire air pressure and inflate, as necessary.

2. Clean the machine thoroughly.

3. Perform required lubrication. See Lubrication and Maintenance in this section.

4. Check all hardware and torque bolts as needed.

5. Review Owner’s Manual, giving special attention to safety precautions.

Содержание 420016020001





















































































Результаты поиска

Содержание 420016020001

Отзывы:

Похожие инструкции для 420016020001

Бренды по названию

Популярные бренды

horsch 420016020001, Руководство пользователя

Результаты поиска

Содержание 420016020001

Отзывы:

Похожие инструкции для 420016020001

Бренды по названию

Популярные бренды