horsch 420016020001, Руководство пользователя

Страница: 64 / 84

64 Omnis FT Owner’s Manual – Ver. 2.0 06/2020
www.horsch.com
HO R SCH
Gauge Wheels
The gauge wheels keep the machine steady and maintain the working depth in the ground. The wheels
only have a sensing and supporting function. They are not designed as load bearing transport wheels.
The gauge wheel can be set, but not until after the depth setting has been completed.
When starting work the gauge wheel should be in its highest position.
The gauge wheel is lifted at the headland when the machine is taken out of the ground.
Setting Gauge Wheels:
1. Before setting the depth of the implement, raise the gauge wheel to its highest position by turning
the turnbuckle.
2. Set the desired machine depth. (See procedure in previous section).
3. Lower the implement to the predetermined set depth into the ground and start tilling the field.
4. Stop in the field with the machine still in the ground. DO NOT LIFT MACHINE OUT OF THE
GROUND!
5. Turn the turnbuckle to lower the gauge wheel to the ground.
NOTE: The tires should only support the machine on the ground in case of obstructions
and following the contour of the field. The frame must always rest on the stop screws.
The wheels should not lift the side wings when in operation.
Gauge Wheel Depth Setting Decal Gauge Wheel Adjustable Ratcheting Turnbuckle
(Above illustrations may not be for actual Omnis machine. These pictures are for reference purposes in
recognition and adjustment of the gauge wheel assembly.)
Turnbuckle
&
Ratchet