horsch 420016020001 Скачать руководство пользователя страница 47

Страница: 47 / 84

Omnis FT Owner’s Manual – Ver. 2.0 06/2020

www.horsch.com

SCH

Service and Maintenance

•

Ensure that regular tests and inspections are always carried out to schedule, as specified in the

operating instructions.

•

Prior to performing maintenance and servicing work, ensure that the machine is positioned on

firm, level ground and that it is properly secured against rolling away.

•

Depressurize the hydraulic system and lower or support the implement.

•

After cleaning, check all hydraulic lines for leaks and loose connections.

•

Check hoses for chafing and signs of other damage. Remedy any faults immediately!

•

Prior to working on the electrical system, disconnect it from the electric power supply.

•

Retighten screwed connections which had been loosened during servicing and maintenance

work.

Do not wash new machines with a steam-jet or high-pressure hose

and cleaner. The paint takes approximately 3 months to cure and

could thus be damaged if this time has not yet expired.

Содержание 420016020001





















































































Результаты поиска

Содержание 420016020001

Отзывы:

Бренды по названию

Популярные бренды

horsch 420016020001, Руководство пользователя

Результаты поиска

Содержание 420016020001

Отзывы:

Бренды по названию

Популярные бренды