horsch 420016020001 Скачать руководство пользователя страница 23

Страница: 23 / 84

Omnis FT Owner’s Manual – Ver. 2.0 06/2020

www.horsch.com

SCH

Machine Installation to Service

Instruction of the operation and initial installation of the machine are done by an

authorized dealer or

HORSCH

representative.

The machine can be released for operation only after instruction by our service

technician or authorized distributor has been completed and the operating

instructions have been read and understood.

When carrying out installation and maintenance work there is a higher risk of injury.

It is important that you familiarize yourself with the machine and read this Owner’s

Manual before operating the machine.

The instructions in respect of initial installation should also be followed if the

machine has not been used (stored) for a longer period of time. Dismantle the

removable parts supplied with the machine.

•

Check all important screw connections.

•

Grease all zerks.

•

Check air pressure in tires.

•

Prepare connection for the lighting equipment.

•

Check all hydraulic connections and hoses for correct attachment

and proper functioning.

Ensure that any deficiencies are remedied immediately.

Содержание 420016020001





















































































Результаты поиска

Содержание 420016020001

Отзывы:

Бренды по названию

Популярные бренды

horsch 420016020001, Руководство пользователя

Результаты поиска

Содержание 420016020001

Отзывы:

Бренды по названию

Популярные бренды