horsch 420016020001 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 84

background image

22 Omnis FT Owner’s Manual – Ver. 2.0 06/2020

www.horsch.com

HO

R

SCH

In These Operating Instructions

The operating instructions distinguish between three different types of warning and safety instructions.
The following graphic symbols are used:

Important instructions!

If there is a risk of injury!

If there is a risk to life and limb!

It is important that all the safety instructions contained in these operating instructions and all the warning
signs on the machine are read thoroughly and understood prior to operation of the machine.

Ensure that the warning signs are legible and replace any signs that are missing or damaged.

These instructions must be followed in order to prevent accidents. Inform other users of the warnings and
safety instructions and the location of this Owner’s Operators Manual.

Do not carry out any operations which may affect the safe use of the machine.

Authorized Operators

Only those persons who have been authorized and instructed by the operator may operate the machine.
Operators must be at least 16 years of age.

The operator must hold a valid driving license. They are responsible for third parties in the operating
area.

The person in charge must:

•

Make the operating instructions available to the operator.

•

Ensure that the operator has read and understood the operating instructions.

The operating instructions are a key component of the machine.

«
...
20
21
22
23
24
...
»

Содержание 420016020001





















































































Отзывы:

Нет отзывов

Похожие инструкции для 420016020001

Бренд: NEILPRYDE Страницы: 53

Бренд: JAC Страницы: 103

Бренд: 3Disc Страницы: 12

medialon Showmaster Go

Бренд: 7th Sense Страницы: 9

Бренд: Backyard Discovery Страницы: 51

Бренд: Nautilus Страницы: 12

Бренд: CAIRE Страницы: 16

Бренд: Gary Machinery Страницы: 14

Бренд: K-LASER Страницы: 70

Бренд: K-LASER Страницы: 72

Бренд: Raymarine Страницы: 3

SmartPilot ST8002

Бренд: Raymarine Страницы: 48

Бренд: Raymarine Страницы: 38

hsb2 PLUS Series

Бренд: Raymarine Страницы: 248

Бренд: Abus Страницы: 12

So-exercise TX7

Бренд: T-SoX Страницы: 8

Бренд: Ignis Pixel Страницы: 4

Deep Root Planter 1.8m

Бренд: Zest 4 Leisure Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды