MAN0868-01
12 October 2007
PAGE 1
HE-XT100
Specifications / Installation
1 Specifications
HE-XT100 Specifications
General Specifications
Required
Power
(Steady State)
130 mA @ 24 VDC
Required
Power (Inrush)
30 A for 1 ms @ 24 VDC
Primary Power
Range
10 – 30 VDC
Relative
Humidity
5 to 95% Non-condensing
Clock Accuracy
+/- One Minute/Month at 20C
Operating
Temperature
-10
°
C to +60
°
C
Terminal Type
Screw Type, 5 mm Removable
Weight
12 oz. (340.19 g)
CE
UL
See Compliance Table at :
http://www.heapg.com/Support/compliance.htm
2
Panel Cut-Out and Dimensions
Note: Max. panel thickness: 5 mm.
Refer to XLt User Manual (MAN0863) for panel box information and
a handy checklist of requirements.
Note:
The tolerance to meet NEMA standards is
±
0.005” (0.1 mm).
3
Ports / Connectors / Cables
Note:
The case of the XLt is black, but for clarity, it is shown in a lighter gray color.
XLT OCS Model: HE-XT100
3.
62
2
[9
2m
m
]
3.622 [92mm]
001XLE002
Power Connector
Power Up:
Connect to Earth Ground.
Apply 10 - 30 VDC.
Screen lights up.
Torque rating 4.5 – 7 Lb-In
CAN Connector
Use the CAN Connector when
using CsCAN network.
Torque rating 4.5 – 7 Lb-In
To Remove Back Cover:
Unscrew 4 screws located on
the back of the unit and lift lid.
CAUTION:
Do not over tighten
screws when screwing the lid
back on.
Memory Slot:
Uses
Removable Memory
for
data logging, screen captures,
program loading and recipes.
Horner Part No.: HE-MC1
Serial Communications:
MJ1
: (RS-232 / RS-485) Use for
Cscape programming and
Application-Defined
Communications.
MJ2:
(RS-232 / RS-485) Use for
Application-Defined
Communications.
Want More Information?
To download the XLt User Manual
(MAN0863), refer to
Technical
Support
in this document.
MJ1
(RS-232 / RS-485)
MJ2
(RS-232 / RS-485)
Memory Slot
NET 1
(CsCAN)
Power
DIP
Switch
