MAN1032-10-EN_EXL6_UserManual
March 12, 2020
82 | 191
8.9 Universal Analog Inputs Model 6
Universal Analog Inputs
The Universal Analog Inputs on the Model 6 IO board are unique from other Horner X-series
input/output cards in that they are configurable through the module configuration instead of
having to change jumper settings in order to setup the input type. To configure the Universal
Analog input type:
1)
Select Analog In to access the Analog Input Configuration menu.
2)
Select any of the Analog input types from the dropdowns by clicking the down arrow
beneath each corresponding Channel, as seen below:
Figure 8.7
–
Analog Input Configuration Screen
