POWER
1. Open the vault with either the
mechanical override barrel key or
a previously programmed code.
2. Locate the battery compartment
door.
3. Swing the battery compartment
door open by pressing the tab
on the door.
4. Insert 4 high-quality AA batteries.
Note:
Replace all batteries at
the same time. Use high-quality
batteries for best performance
PROGRAMMING/RESET
COMBINATION CODE
1. Open the safe with either the
mechanical override key or a
previously programmed code.
Note:
The vault ships with
the default code of 1-2-3-4. To
maintain the security of this
product, a new code must be
programmed before using.
2. Locate the program button
inside the safe near the battery
compartment. Press and release
the program button. The light
blinks and beeps two times.
3. Enter the new 4- to 6-digit code.
Press and release the program
button to enter the new code. The
light will blink and beep twice.
4. Re-enter the new 4- to 6-digit
code. Press and release the
program button to confi rm the
new code. The light will blink
and beep twice before remaining
on for 6 seconds. After the light
turns off, the safe returns to
normal operation.
5. With the lid open, verify that the new code has been programmed and
is functional by entering the new code. The safe motor should cycle
after each correct entry.
Note:
Become comfortable with the operation of your safe before
mounting your safe and storing anything of value inside.
OPEN VAULT BY COMBINATION CODE
Enter the previously programmed 4- to 6-digit code to open the vault.
Note:
• Pressing a button should illuminate the keypad in green.
• When a correct code is entered, the keypad will turn green and the
door should open.
• If an incorrect code is entered, the keypad will blink red and beep one
time.
• After fi ve incorrect entries, the vault will beep and lock out for 2
minutes. The vault can only be opened by the mechanical barrel key
during this time.
LOW BATTERY WARNING
To check the battery level, press any button to illuminate the keypad. If
the battery level is lower than 25%, the keypad will illuminate yellow. The
batteries should be replaced immediately to ensure proper functioning.
KEYPAD TONES ON/OFF
Press and hold the "1" button for
three seconds to toggle sound ON
and OFF.
Note:
Toggling the sound off will
turn the keypad, program, and alarm
beeps off. Toggling the sound on will
turn the keypad, program,and alarm
beeps on.
Item No.: 95432
Ext. Dimensions: 12.0" x 8.3" x 2.6"
Int. Dimensions: 11.5" x 6.0" x 2.4"
Weight: 5.5 Lbs
Power: 4 AA batteries (not included)
Hornady Security
®
electronic components are covered by a one-year warranty
from the date of purchase. See Hornady.com for details.
