Horizon Mobility Aztec 3 2021, Руководство пользователя

Страница: 14 / 36

27/04/2021 14 HZN01/MYN/334
11.13. Column Adjustment
The red handle on the left - hand side of the handle-
bars allows the upper column adjustment. Squeeze
the handle fully to release the column, once in the
correct position, release the handle.
NOTE: With the column in it’s lowest setting the
steering will be locked for vehicle transport.
11.14. Freewheel Lever
On the end of the motor at the rear of the vehicle is
the freewheel lever. To operate, turn vehicle off and
stand behind it, pull the lever gently upwards, this
will release the electromagnetic parking brake. To
re - engage the brake press the lever downwards.
NOTE: The mobility scooter will not drive with the
brake off, the dashboard will display a flashing fault
on the battery display. To restart the scooter if this
happens, turn off the ignition, push down the lever
at the rear of the scooter on the manual brake then
turn on the ignition.
DANGER!
Never sit on the scooter with the brake lever in the
OFF position or try to operate the vehicle.
11.15. Charger Socket (Front)
To charge the scooter, first turn off the vehicle and
remove the key. Then lift the spring loaded cover
over the charger socket located on the back lower
panel of the steering column. Insert the charger
plug into the charging socket, making sure the plug
is fully located by pressing in firmly, before turning
on the charger. Always connect the charger to the
vehicle before plugging it into and switching it on at
the 240v Mains.
11.16. Charger Socket (Rear)
To charge the scooter using the charging socket lo-
cated at the rear of the vehicle, first turn off the ve-
hicle and remove the key. Then lift the spring load-
ed cover over the charger socket located between
the lights on the rear panel. Insert the charger plug
into the charging socket, making sure the plug is
fully located by pressing in firmly, before turning on
the charger. Always connect the charger to the vehi-
cle before plugging it into and switching it on at the
240v Mains.
CAUTION!
Never charge your scooter with the ignition turned
on, serious damage could occur to the scooter and
it will NOT charge with the ignition turned on.
NOTE: If your Aztec has the optional Lithium battery
system fitted then a separate sheet may be provid-
ed giving further instructions for charging.
OFF
BRAKE
ON