4
WARNING:
Before using the VersaBALL FX
TM
Pro please read the following safety instructions to
reduce the risk of injury.
1. Read all warning labels attached to VersaBALL FX
TM
Pro.
2. Read the Assembly/Owner's Manual in its entirety.
3. Make sure the VersaBALL FX
TM
Pro is assembled properly before using, tightening all hardware
4. Do not allow children to play on VersaBALL FX
TM
Pro.
5. Keep pets away from VersaBALL FX
TM
Pro.
6. Keep ball away from sharp objects and inspect ball before each use for any areas where ball
may be damaged; this includes deep scratches or gouges.
7. Keep resistance bands away from rough surfaces and inspect bands before each use for any
areas where resistance bands may be damaged; this includes cuts, deep scratches, or gouges.
8. There are non-slip pads on the base of the VersaBALL FX
TM
Pro, please make sure they are in
contact with the floor. A fitness mat also helps stabilize the product.
9. Consult a physician before exercising on the VersaBALL FX
TM
Pro. If at anytime while working out
on the product you feel discomfort, stop and consult your physician.
10. Choose exercises that fit your level of fitness experience, considering your strength and flexibility
during all exercises.
11. Wear proper fitness clothing; clothing that does not hang over machine.
12. Try to maintain balance at all times when using the VersaBALL FX
TM
Pro. Falling from the machine
may result in serious bodily injury.
13. The VersaBALL FX
TM
Pro should only be used by one person.
WARNING:
Before starting an exercise program consult a physician. This is very important if you
have never exercised before, you are pregnant, or you suffer from any illness making physical activi-
ties more difficult.
Safety Instructions
11
Assembly Instructions
STEP 7
Assemble handle bar to upper ring. The left and right
handle tubes, as well as the rear handle tube, should
slide over the upper ring male tube ends. Use 3 Bolt D’s
and 3 curved washers.
BOLT D
STEP 8
Inflate the ball.
WARNING...DO NOT OVER-INFLATE!
To ensure your ball is inflated properly you will need to measure the distance between the ball and
the seat when the seat is at a mid-level position. There should be a 1/2 inch of space between the
seat and the ball so that the seat can move up and down properly.
.5”
VersaBALL_Pro_User’s_Guide_v1.0.qxd 8/20/2004 10:26 AM Page 5
