Horizon Fitness SmartStacker, Руководство пользователя

Страница: 85 / 412

85 SmartStacker User's Manual
Finishing Line Controller Screen Descriptions
1-3-6
Run - Main Screen - Part 6
5
Flag Mark
In case that the flag is set on the job, the machine
does not start to run even if the sheets are ready for
to be fed.
You can make the fine-adjustment suitable for the
job (see page 117 for details) on the job memory
screen of SmartStacker. And press start button to run
the job after fine-adjustment.
If no flag, the machine automatically starts to run
after changeover when the sheets are ready for to be
fed.
6
Memo
This icon is displayed if there is a memo for the
job. Click on the icon to see the memo in a pop-up
window.
7
Imposition
This shows the imposition for the job.
8
Job ID
The ID number used to identify the job is displayed
here.
9
Job name
The job name is displayed here.
1
Jobs for Reprint
If a reprint is needed because of a jam or other
problem, and the SmartStacker has received a
reprint job from the Digital Front End (DFE), the +
icon is displayed. If you click the + icon, information
on the reprint job will be displayed below.
2
Select All Jobs
You can select all the jobs included in the list at
once. You can also hold, delete or change the status
for all the jobs at once.
3
Select Jobs
Use this to select a single job. You can hold, delete
or change the status for the job.
4
Priority
The priority of the job is displayed here.
1 3 4 5 6 8 7 9
2