Horizon Fitness Elite R4000, Руководство пользователя, Страница: 6 / 27

10 11
R4000
ASSEMBLY STEP 2
A Open hardware for step 2 .
B Slide Console mast grommet from the bottom
up the Console mast .
C Pull Console Cables through Console mast
and carefully tuck all cables into bike frame . Slide
Console mast into bike frame .
d Attach the Console mast to the bike frame
using 4 bolts (d) , 4 spring washers (b) and
4 flat washers (C) from the rear.
E Slide Console mast grommet down over
bike frame .
HARDwARE fOR STEP 2 :
NOTE: Be careful not to pinch any wires while attaching the console mast.
R4000
ASSEMBLY STEP 3
* NOTE: There is no hardware for this step.
A Attach pedal straps to pedals .
B Attach the right pedal to the right Crank
arm , tightening it CloCkwise with the provided
13mm/15mm flat wrench.
C Attach the left pedal onto the left Crank
arm , tightening it Counter-CloCkwise with the
provided 13mm/15mm flat wrench. (NOTE: The left
crank arm is reversed threaded so it is very important
that it is tightened counter-clockwise. Tightening it
the opposite way can damage the pedal or the crank
arm or both.)
d Connect the Console Cables to the Console
and carefully tuck the Console Cables into the
Console mast .
E Attach the Console to the Console mast using
the 4 pre-attaChed sCrews (The screws will
have to be removed from the console first).
NOTE: Be careful not to pinch any wires while attaching the console.
BOLTS (D)
CONSOLE CABLES
CONSOLE MAST
CONSOLE MAST GROMMET
SPRING WASHERS (B)
FLAT WASHER (C)
BIKE FRAME
PRE-INSTALLED SCREWS
CONSOLE MAST
PEDALS
LEFT CRANK ARM
CONSOLE CABLES
CONSOLE
PEDAL STRAP
SPRING WASHER (B)
15.4 mm
Qty: 4
FLAT WASHER (C)
16 mm
Qty: 4
BOLT (D)
M8x50 mm
Qty: 4