Horizon Fitness Elite E7, Инструкция по сборке, Страница: 5 / 23

9 8
L
8
B
K
9
J
6
7
5
2
NOTE: Be
careful not
to pinch any
wires while
attaching the
console mast.
ASSEMBLY STEP 4
A
Open HARDWARE FOR STEP 4 .
B
Carefully pull the CONSOLE CABLE (5)
through the CONSOLE MAST (6) using
the twist tie located inside the CONSOLE
MAST (6) .
C
Attach CONSOLE MAST (6) to MAIN
FRAME (2) using PRE-INSTALLED
BOLTS AND WASHERS (7) .
D
Slide WAVY WASHER (J) over CRANK
(8) followed by PEDAL ARM (9) as shown.
Rest pedal arm wheel on guide rail.
E
Attach the PEDAL ARM (9) to the CRANK
(8) using 1 FLAT WASHER (K) , 1 SPRING
WASHER (B) and 1 BOLT (L) .
F
Repeat steps D–E on the opposite side of
the elliptical.
HARDWARE FOR STEP 4
PART TYPE QTY
J WAVY WASHER 2
K FLAT WASHER 2
B SPRING WASHER 2
L BUTTON HEAD BOLT 2
HARDWARE FOR STEP 3
PART TYPE QTY
G BOLT 4
H SPRING WASHER 4
I FLAT WASHER 4
ASSEMBLY STEP 3
2 3
H
I
G
A
Open HARDWARE FOR STEP 3 .
B
Attach the GUIDE RAIL SET (3) to the
MAIN FRAME (2) using 4 BOLTS (G) ,
4 SPRING WASHERS (H) and 4 FLAT
WASHERS (I) .
HZ14_AG_Elite_E7_E9_Rev1_2.indd 8-9 6/30/14 2:07 PM