Horizon Fitness ELITE E4000, Руководство пользователя

Страница: 5 / 21

8 9
PRE-INSTALLED BOLTS
WAVY WASHER(G)
FLAT WASHER(H)
SPRING WASHER(B)
BOLT(I)
PRE-INSTALLED
FLAT WASHERS
CONSOLE MAST
CONSOLE CABLE
GUIDE RAIL SET
PEDAL ARM
PEDAL ARM WHEEL
CRANK
WAVY WASHER (G)
Φ 17.2x Φ 22.5xT0.5
Qty:2
FLAT WASHER (H)
Φ 8.2x Φ 20.0xT1.5
Qty: 2
SPRING WASHER (B)
Φ
8.2x
Φ
15.4xT2.0
Qty:2
BOLT(I)
M8x20 mm
Qty:2 FLAT WASHER(J)
Φ 20.2x Φ 27.2xT1.5
Qty:4
WAVY WASHER(K)
Φ 20.7x Φ 29.1xT0.5
Qty:2
FLAT WASHER(H)
Φ
8.2x
Φ
20.0xT1.5
Qty:2
SPRING WASHER (B)
Φ
8.2x
Φ
15.4xT2.0
Qty:2
BOLT (I)
M8x20mm
Qty:2
ASSEMBLY Step 3 ASSEMBLY Step 4
A Open
HARDWARE FOR STEP 3
.
B Carefully pull the
CONSOLE CABLE
through the
CONSOLE MAST
using the twist tie located inside
the
CONSOLE MAST
.
C Attach
CONSOLE MAST
to
MAIN FRAME
using
4 PRE-INSTALLED FLAT WASHERS
and
4
PRE-INSTALLED BOLTS
.
d Silde
WAVY WASHER (G)
over
CRANK
followed
by
PEDAL ARM
as shown. Rest
PEDAL ARM WHEEL
on
GUIDE RAIL SET
.
E Attach the
PEDAL ARM
to
CRANK
using
1 FLAT
WASHER (H)
,
1 SPRING WASHER (B)
and
1 BOLT (I)
.
F Repeat steps
D-E
on the opposite side of the elliptical.
A
Open HARDWARE FOR STEP 4 .
B
Slide
1 FLAT WASHER (J)
,
1 WAVY WASHER
(K)
and another
1 FLAT WASHER (J)
onto the
LOWER LINK ARM
.
C
Slide the LOWER LINK ARM into the PEDAL ARM
BRACKET .
d
Attach the LOWER LINK ARM to the PEDAL ARM
BRACKET using 1 FLAT WASHER (H) , 1 SPRING
WASHER (B) and 1 BOLT (I) .
E
Repeat steps B-D on the opposite side of the
elliptical.
HarDWare BaG 3
CONTENTS
HarDWare BaG 4
CONTENTS
NOTE: Be careful not to pinch any
wires while attaching the console
mast
FLAT WASHER (J)
WAVY WASHER (K)
FLAT WASHER (J)
LOWER LINK ARM
PEDAL ARM BRACKET
BOLT (I)
SPRING WASHER (B)
FLAT WASHER (H)