Horizon Fitness Core Series, Руководство пользователя

Страница: 28 / 34

7
28
POWER
Your programmable elliptical trainer is powered by a power supply. The power supply must be
plugged into the power jack, which is located in the front of the machine near the front foot tube.
LEVELING
The elliptical trainer should be level for optimum use. Once you have placed the elliptical trainer
where you intend to use it, raise or lower the adjustable levelers located on the outside of each pedal
arm. Once you have leveled the elliptical trainer, lock the levelers in place by tightening the wing nuts
against the frame.
G E T T I N G S T A R T E D
Core Series
Core Series
R O U T I N E M A I N T E N A N C E
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our ellipticals so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the trainer after each use.
HOW DO I CLEAN MY ELLIPTICAL TRAINER?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness for your elliptical trainer and its operating environment will keep maintenance problems
and service calls to a minimum. For this reason, it is recommended that the following preventive main-
tenance schedule be followed.
AFTER EACH USE (DAILY)
Unplug the power cord from the wall outlet.
WARNING!
To remove power from the elliptical trainer, the power cord must be disconnected from the wall out-
let.
Wipe down the elliptical trainer with a damp cloth. Never use solvents, as they can cause damage
to the elliptical.
Inspect the power cord. If the power cord is damaged, contact Sears.
Make sure the power cord is not underneath the elliptical trainer or in any other area where it can
become pinched or cut.
EVERY WEEK
Clean underneath the Elliptical, following these steps:
Fold Elliptical to its upright position. Mke sure the Elliptical pedal arms are secure before running.
Unplug the power cord at the wall outlet.
Move the elliptical trainer to a remote location.
Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
Elliptical.
Return the elliptical trainer to its previous position.
EVERY MONTH
Inspect all assembly bolts and pedals on the machine for proper tightness.
TIPS
RE1 ownerís guidev1.1.qxd 10/13/2003 1:53 PM Page 8