Horizon Fitness 7.0AT-03, Руководство по обслуживанию

Страница: 18 / 48

E
NGINEERING
M
ODE
Table of Contents
7.0AT-03
18 Service Manual
Engineering Mode
Engineering Menu Overview
To enter Engineering Mode, press and hold the incline up key and the speed down key for
3 to 5 seconds.
ENG
No
Function Sub Function Operation
0 Display test
0 Ready
Press incline 15 and speed 12 at the same
time for 3 seconds
1 All key light up Press “Push to select”
2 All key light off Press “stop”
Escape Escape present function Press “stop” 3 seconds
1 Hardware test
0 Ready
Clockwise rotate “push to select” to enter
ENG1
2 MAC address Press “push to select” to enter
3 BT device Press “push to select” to enter
Escape Escape present function Press “stop” 3 seconds
2
No defined
function
Not function
Clockwise rotate “push to select” to enter
Press “stop” 3 seconds to escape present
function
3
Switch
function
0 Ready
Clockwise rotate “push to select” to enter
ENG3
1 Energy save on Press “push to select” to enter
2 Boot off (reset all Parameter) Press “push to select” to enter
3
Unit change mile/Km (press
“stop” 3 seconds to save)
Press “push to select” to enter
Escape Escape present function Press “stop” 3 seconds
4
Information
0 Ready
Clockwise rotate “push to select” to enter
ENG4
1
Accumulated information
(distance and time)
Press “push to select” to enter
2 UCB version Press “push to select” to enter
3 MCB version Press “push to select” to enter
Escape Escape present function Press “stop” 3 seconds