horiba TPNA-500, Инструкция по эксплуатации

Страница: 205 / 261

Modbus
189

History (Calibration)
1.
Setting of request start time
2. Setting of request completion time
3.
Setting of request element
4. Request status: Initialization (1) is set and then the data preparation is executed.
5.
Request status: The same data (3) are set and then the first data are read.
6.
Request status: The next data (2) are set and then the data are read.
Note
Request status: When the same data (3) are set, the same data are read.

History (Optical Signal)
1.
Setting of request start time
2.
Setting of request completion time
3. Setting of request data number
4.
Request status: Initialization (1) is set and then the data preparation is executed.
5. Request status: The same data (3) are set and then the first data are read.
6.
Request status: The next data (2) are set and then the data are read.
Note

Up to the 50th data item from the specified request data number can be read.

Request status: When the same data (3) are set, the same data are read.

Others (Main program information/sub program information)
1.
Reading

Others (writing of setting)
1.
When writing request (1) is written, the setting is stored in the memory.