horiba APNA-370, Руководство по эксплуатации, Страница: 45 / 113

5 DATA PROCESSING
33
5.1 Average
An average data is calculated by summing the measured values (momentary values) acquired
every 1 second for a specified calculation period, and then dividing the cumulative total by the
data counts.
There are three AVERAGE data (AVERAGE 1 to AVERAGE 3), calculated using different cal-
culation periods. And these calculation results can be checked on the respective AVERAGE
screens.
Table 1 AVERAGE types
Note

If the data counts exceeds the data capacity, the oldest data will be automatically deleted.

The time displayed on the AVERAGE screen is the final data acquisition time.
Pressing the [AVERAGE 1], [AVERAGE 2], or [AVERAGE 3] on the MENU/DATA screen
displays the screen showing the latest data.
Fig. 45 AVERAGE screen (AVERAGE 1)
If an alarm occurs within the calculation period, the alarm record is also displayed with the
data.
Note

For the details of alarms, see “8.2 Alarm List” (page 83).

A maximum of 16 alarms can be displayed in high-priority order.
If the 17th or later alarms occur within the same calculation period, these alarms are not
displayed.
For the other screen functionalities, see “

Screens for data check” (page 31).
Data Calculation period Recorded data capacity
AVERAGE 1 3 min 1000 data
AVERAGE 2 30 min 1000 data
AVERAGE 3 3 h 100 data