horiba ABX MICROS ES60, Руководство пользователя

Страница: 86 / 200

ABX Micros ES60 OT/CT
4–18 User Manual - RAB237AEN
6. Results
6.1. Results from analyser
◆
Once analysis is completed, the data are treated by the instrument calculation software which
allows the display of results in accordance with the instrument settings (parameters, units, curves,
alarms, etc.).
◆
These results are associated with analysis limits specified in the instrument settings.
◆
Thus, morphological flags may be determined.
6.2. Displaying results
6.2.1. Result display screen
◆
The results are automatically displayed in the " Result display " screen.
◆
A patient result screen gives the following information:
- the patient information: See
6.2.2. Patient information, page 4-19 .
- the alarms if any were reported: See 6.2.3. General alarms, page 4-19 .
- the patient results and associated flags: See 6.2.4. Results and associated flags, page 4-19 .
◆
It allows to display detailed results of one paramater family: See 6.2.5. Detailed results, page 4-20 .
◆
To print or send results to the LIS: See 6.3. Results sending and transmitting, page 4-21 .
◆
A result screen also allows to run analysis with simplified identification: See 6.4. Analysis run with
the simplified identification, page 4-25 .
Diag.4-17 Result display
◆
Use " Previous " and " Next " buttons, located at the top of the result screens,
to navigate between patient result screens of the same session (See Section
1,
"Previous" and "Next" buttons, page 1-16 ).
◆
Use the " Result history " menu to display all stored results(See 6.5. Result
history, page 4-26 ).
◆
Use the " Back " button to return to the " Sample identification " menu.
To display RUO parameters (PCT and PDW), the function " With RUO data " must
be activated in the " Settings " menu (See Section 6, 6.5. Analysis running,
page 6-14 ).