Horiba Scientific LAQUAact D-72G, Инструкция по эксплуатации

Страница: 50 / 94

Saving measurement data in the internal memory
30
●
Saving measurement data in the internal memory
Up to 1000 data items measured by the instrument can be stored in the internal memory
of the instrument. The measurement data is saved in the internal memory in the
measurement mode, except during the automatic hold measurement.
1. While the data to save is displayed, press the key to enter the data mode.
2. Select "IN" (data saving) and press the key.
Saved data is displayed for 2 seconds and the "IN" appears automatically.
Note
If 1000 data items have already been saved, an error occurs and "ERR No. 0010" is dis-
played. Copy or transfer necessary data to a PC and delete the data from the memory (“
Deleting all saved data ” (page 32)).
key
key