Horiba Scientific LAQUAact D-72G, Инструкция по эксплуатации

Страница: 26 / 94

Basic operation
6
■
Basic operation
●
Changing the operation mode
This instrument is operated by changing the operation mode from four available modes,
depending on the purpose of use. The status icon indicates the current mode. You can
change the operation mode using the corresponding key. However changing to the
calibration, data, or setting mode is available only from the measurement mode.
When changing to a different mode, first change to the measurement mode and then
change to the desired mode.
Icon Name Function
Measurement mode Performs measurement.
Calibration mode Performs calibration.
Data mode
Saves data in the internal memory. Displays the saved
data, the calibration history and the inspection history.
Setting mode Performs various settings.
Status icon
key key
key key
key key
Data mode Setting mode Calibration mode
Measurement mode