manualshive.com logo in svg

Horiba Scientific DS-72G, Инструкция по эксплуатации

Поделиться
Скачать
Horiba Scientific DS-72G Скачать руководство пользователя страница 40

 

20

2.6 USB Memory Setting

Simultaneously Memory

Eject

If you remove a USB memory from the instrument in a way other than mentioned above,
data may not be saved correctly or data may be corrupted.

1.

Tap 

 on the right of the USB Memory item.

The USB memory setting screen is displayed.
Tap 

 to return to the previous screen.

1.

Tap 

 on the right of the Simultaneously 

memory item and select ON.

1.

Tap 

 on the right of the Eject item and tap 

 in the execution confirmation screen.

To cancel the operation, tap 

.

2.

When the ejection is completed, a notice 
message will appears. Tap 

.

Memory data can be written into a USB memory.

When a USB memory is inserted into the 
instrument, the data can be written into both the 
instrument and USB memories at the same time.

Use this item to eject the USB memory from the 
instrument.

Содержание DS-72G











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды