How to Reset Buttons Individually
How to adjust
Assign Mode
Program LED (Right)
will flash.
①
②
③
Program LED (Right)
will turn off.
Program LED (Left)
will turn on.
or
You can remap the function of buttons using this feature.
Program LED (Right)
will turn on.
3
sec
Programmable Buttons
L1 Button / R1 Button / L2 Button / R2 Button /
L3 Button / R3 Button / L paddle / R paddle
L pedal / R pedal
Assignable Functions
j
Button /
k
Button /
h
Button /
l
Button / L1 Button / L2 Button / L3 Button / R1 Button
/ R2 Button / R3 Button / L paddle / R paddle / L pedal / R pedal
Left stick (Right / Down / Left / Up) / Right stick (Right / Down / Left / Up) / Directional Pad
Programmable Buttons
or
"LS" for Left stick
"RS" for Right stick
* For step 3, to assign a specific direction input of the Left Analog Stick to a button,
set the Directional Pad toggle switch (DP/LS/RS) to [LS] and press the D-Pad
in the direction you want to assign. For Right Analog Stick, set to [RS].
For step 3, press the same button from step 2 to individually reset buttons to default.
* After 4 seconds of inactivity between steps, Program LED (Right) will turn off and program mode will stop.
* During steps 2, button input from the controller to the PlayStation®4 console will be disabled.
* When the Program LED (Left) turns on, it indicates that a button is remapped and will not turn off
until button function is reset to default.
* If you want to disable button function, press and hold for 3 seconds the same button you pressed in step 2
at the time of step 3.
* If you pressed multiple buttons during step 3, the last button you pressed will be assigned.
* Controller settings are stored even if the USB is disconnected.
* Press the direction (Right, Down, Left or Up) to
assign the desired function.
Assignable Functions