HORI SPF-004, Инструкция по эксплуатации, Страница: 7 / 10

Foot pedals
Quick Handling Mode
・
Dead Zone Adjustment
・
Linearity Adjustment Reset All
①
Program LED (Right)
will turn on.
Gradual Responsive Default
1 2 3 5 6
LED color
4 7
Green Yellow Red Purple Blue Light Blue White
Sensitivity value increases by pressing up on the Directional Pad.
Responsive
⑤
③
④
Sensitivity value decreases by pressing down on the Directional Pad.
Gradual
Program LED (Right)
will turn off.
Program LED (Left)
will turn off.
Program LED (Right)
will flash.
②
Program LED (Left) color
will change to indicate
the selected rotation angle.
(The Program LED will light up red when assigning buttons.)
3
sec
* If you do not perform step ② after ① , the Program LED will turn off after four seconds and
Sensitivity Adjustment mode will automatically end.
* During steps
②〜③ , only the steering unit and foot pedal input are enabled.
Button input from the controller to the PlayStation®5 console or PlayStation®4 console will be disabled.
* Controller settings are saved even if the USB is disconnected.
To simultaneously reset all of the following : Quick Handling Mode ・ Dead Zone Adjustment ・ Linearity Adjustment.
Program LED (Right)
will turn off.
Program LED (Left)
will turn off.
(The ASSIGN LED will light up red when assigning buttons.)
①
Program LED (Right)
will turn on.
②
* If you do not perform step
②
after
①
, the Program LED will turn off after four seconds and
assignment mode will automatically end.
③
When Quick Handling Mode is canceled, steering wheel input value will default to 270°.
Dead zone and linearity default values are set to “4”.
3
sec
3
sec