S
YSTEM
P
ARAMETERIZATION AND
O
PERATION
System 6844(RC) - V03.00
69 / 157
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
5.3.8 LAN Board Parameters
Further information and an explanation of the parameters can be found in the description of
the LAN Board.
The LAN Board parameters are cyclically updated (approximately every 10
seconds) in Control Board 6844(RC), as these can also be changed via the
WebGUI of the respective Board.
5.3.8.1 Display Frames for LAN Board 1 Parameters
The configuration of the LAN Board coded as Board 1 is displayed on this display frame.
IP Address Displays
Selection frame:
S H O W L A N _ 1
I P - A D R .
Y / N
Display frame:
L A N _ 1
I P - A D R .
> 1 9 2 . 1 6 8 . 2 0 2 . 2 1 0
Gateway Address Displays
Selection frame:
S H O W L A N _ 1
G A T E W A Y - A D R . Y / N
Display frame:
L A N _ 1
G W - A D R .
> 1 9 2 . 1 6 8 . 2 0 2 . 0 1 0
Network Mask Displays
Selection frame:
S H O W L A N _ 1
N E T M A S K
Y / N
Display frame:
L A N _ 1
N E T M A S K
> 2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
Control Byte Displays
Selection frame:
S H O W L A N _ 1
C T R L . - B Y T E
Y / N
Display frame:
C T R L . - B 7 6 5 4 3 2 1 0
L A N _ 1 > 0 0 0 0 0 0 1 0
5.3.8.2 Display Frames for LAN Board 2 Parameters
Selection frame:
S H O W L A N 2
I P - A D R .
Y / N
The configuration of the LAN Board coded as Board 2 is displayed on this display frame.
The LAN Board 2 parameters are displayed in the same way as for LAN Board 1.
