ASSEMBLY INSTRUCTION
ITEM# 6960-75206-81 60in Friendship Table w/2-12in Leaves
Caution: Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two or more people.
Note:
1. Leaves cannot be switchable. Follow numbers on leaves and top when assemble.
2. Height of this table can be adjusted with or without extension blocks.
Assembly steps without extension blocks (30” height):
Diagram 1
1. Place table top (E) upside down on a soft surface to
prevent it from being scratched.
2. Place stretcher (F) onto top, make sure pre-drilled
holes on stretcher are aligned with holes on top. (See
Diagram 1)
3. Screw posts (G) through stretcher (F) to top by
turning in clockwise direction. (See diagram 2)
4. Place bases (H) onto posts and make sure all
pre-drilled holes are in alignment, well insert flat
washers (D), lock washers (C) and bolts (B), tighten
all with allen wrench (A). (See Diagram 3)
5. Turn desk upright.
Diagram 2
Diagram 3
1/3