Hoobico FLW4090, Инструкция по сборке и эксплуатации

Страница: 9 / 16

9
ENGLISH
Put the cowling to the fuselage and take care of a gap of 3 mm
between the spinner and the cowling. Fic the cowling with
tape in this position.
Now drill with a 1.5 mm driller 3 holes from the outside through
the cowling and the wood of the fuselage. The distance form
the cowling border to the holes should be about 8 mm. Fix
the cowling with 3 pcs of 10 mm wood screws. Now you can
mount propeller and spinner. The best result you have, if you
balance propeller with spinner together.
INSTALLING THE FW5065 ENGINE
Fix the drilling template on the firewall, that the dotted lines
are congruent with the laser lines on the firewall frame. Drill
4mm holes at the markers in each corner.
The FW5065 motor should be screwed against the firewall,
using the 4mm PVC distance shims. On the backside of the
firewall take the bigger shims for the lower screws and smaller
shims for the upper screws.
The FW Control-100 ESC can be placed on the left side of the
fuselage, to keep enough place for the battery.