_________________________________________________________________________________________________
________________________________________________________________________________________
6/15
U326_UVAintAS102_B_e_210316
burden max. 200 Ohm
x °C fixed preset initial value for measuring temperature
y °C fixed preset terminal value for measuring temperature
(see accompanying documentation)
6.6
Measurement Uncertainty
Recording the measurement frequency (at 1000 Hz) : <0.1%
Analog output (terminal value)
: <0.15%
Linearity error
: <0.1%
Temperature coefficient
: <20 ppm/K (at 25 °K temperature difference
equivalent to <0.05%)
7
Installation
The current European Specifications for Assembly, the recognised standards of good practice and this
Operating Instructions apply.
7.1
Block Diagram
(Terminals 10 ... 14 are not populated and only accessible internally)
7.2
Wiring Diagrams
Electrical connection must be carried out according to the appropriate wiring diagram.
Faulty connection can cause damage to persons and destruction of the electronics.
Do not install or wire up the transducer under mains voltage. Non-compliance can cause damage to
persons and destruction of the electronics.
UVA integrated
