UVAHAND LED
12
# 073350DE-EN b
2.13.
Danger from gases
Under certain circumstances, chemical
vapours may be released when irradiat-
ing materials with the UVAHAND LED.
The safety data sheets for the
materials being irradiated must
be observed.
Also observe the rules on harm-
ful substances in the workplace.
Upon beginning operation, the
air contamination of the work-
space is to be measured. In the
event of increased air contami-
nation, it is necessary to set up
an air extraction and exhaust
system.
If necessary, respiratory protec-
tion must be worn.
The most commonly used UV-
curable adhesives do not emit
vapours when irradiated with the
UVAHAND LED.
2.14.
Service, maintenance, remedying faults
All necessary servicing work is described in
the chapter "Servicing, maintenance and
cleaning; Service." Carrying out these
tasks ensures reliable operation.
If faults occur in the UVAHAND LED, the
chapter "Faults" provides information on
the causes of faults and possible remedial
action.
If a fault which cannot be remedied using
these instructions arises on the unit, con-
tact the Hönle customer service.
Parts that are not in flawless condition
must be exchanged immediately.
Use only original replacement and wear
parts.
There is no guarantee that parts from
other manufacturers are designed and
manufactured to meet the required stan-
dards of robustness and safety.
No changes, additions or conversions
may be made to the UVAHAND LED
without the permission of Dr. Hönle AG.
Contact address for claims under war-
ranty, repair and replacement part ser-
vice:
Dr. Hönle AG
UV-Technologie
Lochhamer Schlag 1
D-82166 Gräfelfing / Munich, Germany
Phone: +49 (0)89 / 856 08-0
Fax: +49 (0)89 / 856 08-148
E-Mail:
WARNING!
No repairs or changes may be made to the unit other than
those described in these Operating Instructions.
Danger from
gases
Servicing,
maintenance,
remedying
faults
