3
direct contact with skin and eyes. Serious burns
can result from some drain cleaning compounds.
• Do not operate machine if operator or machine
is standing in water. Will increase the risk of
electrical shock.
• Wear safety glasses and rubber soled, non-slip
shoes. Use of this safety equipment may prevent
serious injury.
• Only use the A150 to clean drain lines up to 6″
in diameter. Follow instructions on the use of the
machine. Other uses or modifying the drain
cleaner for other applications may increase the
risk of injury.
Description, Specifications and
Standard Equipment
Description
The A150 is a portable Drain Cleaning Machine
designed to clean 11/4
” to 6” drain lines.
Applications include sink, shower and floor
drains. Capable of running 2 different size cables:
16mm and 22mm.
The machine is driven by a 750W motor that has
a grounded electrical system. A toggle switch
provides FORWARD/OFF/REVERSE control of
the motor.
The A150 is designed to use 5/8
”(16mm) and
7/8
”(22mm) diameter sectional-type cable that
has a quick change coupling system for
disconnecting tools. The cable is manually fed in
and out of the drain and rotates at a speed of
460 RPM. The rotation of the cable is controlled
by a clutch handle. The cable stops instantly
when the clutch handle is released.
The A150 is also designed to use with the
adapter (optional) which hold 5/16
”(8mm)
continuous length cables. Rotation of the
adapter is controlled by the clutch handle. The
cable adapter is equipped with a quick-acting
brake which immediately stops rotation of the
drum when the clutch handle is pulled upward.
Specifications
Line Capacity ...............Depends on choice of
cable.
Cable Sizes ..................16mm, 22mm
Motor Type ..............................115V/50-60 Hz,
Reversible, 230V Available Upon Request
Rating ............................750W (input 1100W)
Amps .............................5.5A/10A
Weight...........................22.5KG
Dimensions
Length ........................... 455mm
Height ............................525mm
Width ............................. 250mm
Machine Inspection
To prevent serious injury, inspect your Drain
Cleaning Machine. The following inspection
procedures should be performed before each use.
1. Make sure the Drain Cleaning Machine is
unplugged and the directional switch is set to the
OFF
position.(Figure 1)
Left: to reverse
Middle: to stop
Right: to forward
Fig 1
2. Inspect the power cord and plug for damage.
If the plug has been modified, is missing the
grounding prong or if the cord is damaged, do
not use the Drain Cleaning Machine until the
cord has been replaced.
