manualshive.com logo in svg

Honeywell XNX-AM Series, Техническое руководство, Страница: 17 / 207

Поделиться
Скачать
Honeywell XNX-AM Series Скачать руководство пользователя страница 17

XNX Universal Transmitter

Introduction

15

Cover

The transmitter cover is supplied in the identical material 

specified for the enclosure.

Cover Lock Screw, requires a
2mm hex key (included)

Tempered Glass Window

Cover

Figure 3. XNX cover components

A tempered glass window requires the use of the  supplied 

magnetic 

wand/screwdriver to activate the four user interface switches 

located on the front of the display module. This allows for non-

intrusive setup and operation. 

A locking screw integrated into the cover provides positive 

locking that can be loosened by using the supplied 2mm 

hex 

key.

 

Figure 4. Magnetic wand/screwdriver

Note: 

When attaching the cover or stopping plugs, coat the threads with a suitable anti-

seize compound to prevent corrosion.

NOTE

!

POD 

The 

POD (

P

ersonality, 

O

ptions, and 

D

isplay) includes circuit 

boards for the personality module, optional interfaces, and 

display.  
The personality module, or circuit board, determines the 

transmitter behavior based on the sensor type attached to 

the transmitter (electrochemical cell, catalytic bead sensor, or 

infrared) and provides the necessary interface. Connection to the 

attached sensor is made through the sensor connector.
The optional communication boards vary depending on the 

option selected when ordered. Only one of the three available 

interface options (relays, Modbus, or FOUNDATION Fieldbus) 

can be attached to the transmitter. 

Figure 5. POD, exploded view

Содержание XNX-AM Series
















































































































































































































Отзывы:

Нет отзывов